Interior

  • The stubby 0.5″ mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

    Machined billet alumium housing.

    Mounting width is variable by bolting arms to the inside or outside of mirror mounting tabs for widths from 11.5″ to 13.25″ from the outer edge of each mounting clamp.

    We offer a lifetime warranty on all our mirrors. FREE REPLACEMENT of your mirror insert.

    $159.95$179.95
  • The Axia Alloys 12″ panoraminc mirror is a game changer for the cockpit of your vehicle. Intended to mount directly in front of the driver or copilot, this mirror has a solid black sun visor that folds down to block that blinding sun.

    The stubby mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

    Adjustable tension on the sun visor as well so that it stays put in the wind even without a windshield.

    This is the page to purchase the SOLID BLACK sun visor.

    Visor has Machined billet aluminum frame with AR coated scratch resistant plastic shield.

    Mounting width is variable by bolting arms to the inside or outside of mirror mounting tabs for widths from 11.5″ to 13.25″ from the outer edge of each mounting clamp.

    This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

    $219.95
  • The Axia Alloys 12″ panoraminc mirror is a game changer for the cockpit of your vehicle. Intended to mount directly in front of the driver or copilot, this mirror has a Tinted sun visor that folds down to block that blinding sun.

    The stubby mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

    Adjustable tension on the sun visor as well so that it stays put in the wind even without a windshield.

    This is the page to purchase the TINTED sun visor. Solid Black also available

    Visor has Machined billet aluminum frame with AR coated scratch resistant plastic shield.

    $219.95
  • This 12″ wide sun visor has a solid black shield (Dark Tinted Also Available)

    Adjustable tension so you can be assured that it will not move on you at high speeds, even without a windshield.

    Machined billet aluminum frame with AR coated scratch resistant plastic shield.

    Mounting width is 13.25″ from the outer edge of each mounting clamp.

    $109.95
  • Ultra thin with an ultra clean view, the Axia alloys 17” billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

    This is the LONG ARM version of this mirror, shorter arms are available.

    Axia alloys recommends that you use these 6″ length arms on OEM UTV, and aftermarket cages where the mounting bar is moved back closer to the drivers head, these 6″ arms are to mount the mirror further out.

    Use 6″ arms on the following OEM Cages Yamaha Rhino, CanAM Commander, Kawasaki Teryx, Teryx 4, Arctic Cat Wildcat

    $184.95
  • The king of mirrors this 17″ billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

    This is the SHORT ARM version. 1.5″ mounting length

    Axia alloys recommends that you use the 1.5” length arms on aftermarket cages where the mounting bar is far enough in front of you

    Use 1.5″ arms on the following OEM cages

    Polaris Rzr, xp, rzr 4, polaris ranger

    $174.95
  • The 17″ billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion. This is the MEDIUM LENGTH ARM version. 2.5″ mounting length Axia alloys recommends that you use the 2.5” length arms on OEM polaris RZR cages when you have an aftermarket overhead stereo installed. This works with the MTX and SSV overhead units on all polaris RZR models – See more at: http://axiaalloys.com/Mirrors/17-inch-rearview-mirror-with-mounts-for-use-with-SSV-stereo#sthash.v46qoR6N.dpuf

    $179.95
  • When mounting harnesses in your vehicle, it is nice to have the convenience of quick release spring clips. Invented by the technicians of racing teams these clips have been designed to hold you and your harnesses securely even in the worst conditions but also quickly detach for the scurry in the pits. Platted for rust and corrosion resistance means these clips will function properly for years to come. Integrated safety wire lockout holes make these suitable for almost any racing association. Whether you’re a seasoned racer or weekend warrior the DragonFire quick release harness mounting kits will make life easier.

    $14.99
  • When mounting harnesses in your vehicle, it is nice to have the convenience of quick release spring clips. Invented by the technicians of racing teams these clips have been designed to hold you and your harnesses securely even in the worst conditions but also quickly detach for the scurry in the pits. Platted for rust and corrosion resistance means these clips will function properly for years to come. Integrated safety wire lockout holes make these suitable for almost any racing association. Whether you’re a seasoned racer or weekend warrior the DragonFire quick release harness mounting kits will make life easier.

    $14.99
Inner Demon Motorsports
X