The stubby 0.5″ mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

Machined billet alumium housing.

Mounting width is variable by bolting arms to the inside or outside of mirror mounting tabs for widths from 11.5″ to 13.25″ from the outer edge of each mounting clamp.

We offer a lifetime warranty on all our mirrors. FREE REPLACEMENT of your mirror insert.

The Axia Alloys 12″ panoraminc mirror is a game changer for the cockpit of your vehicle. Intended to mount directly in front of the driver or copilot, this mirror has a solid black sun visor that folds down to block that blinding sun.

The stubby mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

Adjustable tension on the sun visor as well so that it stays put in the wind even without a windshield.

This is the page to purchase the SOLID BLACK sun visor.

Visor has Machined billet aluminum frame with AR coated scratch resistant plastic shield.

Mounting width is variable by bolting arms to the inside or outside of mirror mounting tabs for widths from 11.5″ to 13.25″ from the outer edge of each mounting clamp.

This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

The Axia Alloys 12″ panoraminc mirror is a game changer for the cockpit of your vehicle. Intended to mount directly in front of the driver or copilot, this mirror has a Tinted sun visor that folds down to block that blinding sun.

The stubby mirror arms included tuck this mirror right up against the mounting bar, and allow you to adjust the overall mounted height of the mirror by pivoting the clamp around the mounting tube.

Adjustable tension on the sun visor as well so that it stays put in the wind even without a windshield.

This is the page to purchase the TINTED sun visor. Solid Black also available

Visor has Machined billet aluminum frame with AR coated scratch resistant plastic shield.

This 12″ wide sun visor has a solid black shield (Dark Tinted Also Available)

Adjustable tension so you can be assured that it will not move on you at high speeds, even without a windshield.

Machined billet aluminum frame with AR coated scratch resistant plastic shield.

Mounting width is 13.25″ from the outer edge of each mounting clamp.

Ultra thin with an ultra clean view, the Axia alloys 17” billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

This is the LONG ARM version of this mirror, shorter arms are available.

Axia alloys recommends that you use these 6″ length arms on OEM UTV, and aftermarket cages where the mounting bar is moved back closer to the drivers head, these 6″ arms are to mount the mirror further out.

Use 6″ arms on the following OEM Cages Yamaha Rhino, CanAM Commander, Kawasaki Teryx, Teryx 4, Arctic Cat Wildcat

The king of mirrors this 17″ billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion.

This is the SHORT ARM version. 1.5″ mounting length

Axia alloys recommends that you use the 1.5” length arms on aftermarket cages where the mounting bar is far enough in front of you

Use 1.5″ arms on the following OEM cages

Polaris Rzr, xp, rzr 4, polaris ranger

The 17″ billet panoramic rearview mirror offers the widest non distorted viewing angle of any mirror on the market. This mirror is very slighly curved ONLY in the horizontal direction so that you get a nice wide view of what is behind you without distortion. This is the MEDIUM LENGTH ARM version. 2.5″ mounting length Axia alloys recommends that you use the 2.5” length arms on OEM polaris RZR cages when you have an aftermarket overhead stereo installed. This works with the MTX and SSV overhead units on all polaris RZR models – See more at: http://axiaalloys.com/Mirrors/17-inch-rearview-mirror-with-mounts-for-use-with-SSV-stereo#sthash.v46qoR6N.dpuf

These billet side mirrors have a 4.0″ outer diameter and are fitted with a scratch resistant convex mirror,

Extremly Strong Full Billet Aluminum construction

Mirrors are fully adjustable and lock into position so that they can take vibration and hits from branches without movement.
– See more at: http://axiaalloys.com/Mirrors/Billet-4-inch-Round-Convex-Side-Mirror-Attachment–Satin-Clear-Black#sthash.EwZjClwu.dpuf

Very slight convex glass inserts for a little larger field a view with very little distortion.

The Axia Alloys 5″ convex side mirrors feature a fully adjustable billet arm so that they can be mounted on both horizontal and vertical bars of any angle.

The satin and clear annodized mirrors are supplied with a chrome finish mirror body, while the black annodized arms come with a black powdercoat body.

Flat Glass option.

The Axia Alloys 5″ FLAT GLASS side mirrors feature a fully adjustable billet arm so that they can be mounted on both horizontal and vertical bars of any angle.

The satin and clear annodized mirrors are supplied with a chrome finish mirror body, while the black annodized arms come with a black powdercoat body.