Plug n Play Taillight Power Up Kit “by Inner Demon Motorsports” is a simple solution to add power to whip lights, license plate lights, or low powered led lights.
•Easy Install Plug and Play•Wire Harness pre-made with 4 wire connectors•5′ of Extra wire provided to get to rear of the Roll Cage or other locations.•Output is power and ground•Includes Cable Ties, Butt Connectors and Heat Shrink•Fits 2015 and 2016 Polaris RZR 900/1000 and others with 4 pin connectors
True “Plug N Play” means no cutting of the factory wiring harness, Just un-plug the drivers side rear connector of the car and plug our adapter in. Then run then run the extra wire loom to It installs in just minutes. Plug N Play Adapter with 5′ power wire, 2 butt connectors with heat shrink, 4 cable ties and Heat Shrink to cover connections. This model is a 4 wire connector and it works on the following, Polaris 2015 & 2016 RZR 900 2 and 4 seat models as well as the XP 1000 2 and 4 seater.
This beauty of this kit is the whatever you choose to “power up” comes on when the ignitiion is turned on so there is no need to run additional wires to a switch.
Installs in minutes.
This adapter is for low current lights such as license plate or whip light.
Use on high current lights could cause the fuse to blow or damage the OEM wiring. Warning! Do not overload the vehicles electrical system.
This adapter is for Polaris RZR’s that have a 4 pin connector with 4 wires going into the rear light harness as pictured above.
Includes enough wire to hook up 2 rear whips.